Technical News

Home » Blog » Technical News

Article title
Article summary
Article content
Multi Field Search

Blog Category

Related Products

UV Resistance Black PMMA/ASA Plastic Granules in Automotive Industryies

Mechanical Strength UV Resistance ASA Plastic Granules for Automotive

20% Glass Fiber Reinforced AS GF20 Plastic Raw Material

Flame Retardant PC/ABS Alloy UL 94-V0 Engineering Plastic Material

PC ABS Alloy Plastic Granules

How To Choose Materials for Lead Acid Battery Cases?
2025-09-16

The choice of materials for lead-acid battery cases is crucial as it directly impacts the safety, longevity, and application of the battery. Here’s a detailed breakdown of the modified PP and modified ABS materials used. Read More
AES Vs ASA: A Comprehensive Guide To Selecting The Right Material for Outdoor Applications
2025-09-01

This is a comprehensive comparison between AES and ASA for outdoor use. The article will explore the differences through different aspects. Read More
Five Steps To Reduce The Dimensional Shrinkage of PC GF10
2025-08-20

Five-step process recipe to further reduce the dimensional shrinkage of PC-GF10 (10 % glass-fiber reinforced polycarbonate) to < 0.3 % while minimizing warpage. Read More
What Is The Effect of Adding Glass Beads？
2025-08-11

Polyamide (PA) engineering plastics—most notably PA66—are prized for their balance of strength, chemical resistance and processability. To push performance further, compounders traditionally add chopped glass fibers (GF). More recently, hybrid systems that combine glass fiber (GF) with spherical glass beads. Here are the details. Read More
The Possible Injection Molding Problems of PC/ABS FR UL-94 V0 Material
2025-08-04

PC/ABS FR UL-94 V0 is an engineering plastic alloy composed of polycarbonate (PC) and acrylonitrile-butadiene-styrene (ABS), flame-retardantly modified to meet the UL94 V-0 standard. In the below article, we have collected some of the common issues while injecting PC/ABS FRV0 materials. Read More
The Possible Causes of Flow Marks While Injecting
2025-07-30

When injecting certain engineering plastics, i.e ABS V0, PA6 GF30, PP GF30 etc, we occasionally receive feedback of visible flow marks. Now, Let's break down the causes. The most common causes of flow marks (flow lines) in injection molding can be grouped into the following key categories: Read More
What Is The Difference between Long Glassfiber PP And Short Glassfiber PP?
2025-07-11

The key differences between polypropylene with short glass fiber (SGFPP) and polypropylene with long glass fiber (LGFPP) lie in fiber length, mechanical performance, structural integrity, surface quality, and application suitability. Read More
INTRODUCTION: PA6 GF30 USE IN ELECTRIC TOOLS:
2025-06-11

PA6 GF30 - The Engineering Backbone of Modern Electric ToolsPA6 GF30 (30% glass fiber-reinforced polyamide 6) has emerged as a critical engineering plastic in the electric tool industry, driven by demands for lightweight durability, thermal resilience, and precision performance. This composite mater Read More
PC/ABS Plastic Resin: A Comprehensive Guide To Properties, Variations, Selection, And Processing
2025-06-05

PC/ABS Plastic Resin: A Comprehensive Guide to Properties, Variations, Selection, and Processing. PC/ABS (Polycarbonate/Acrylonitrile Butadiene Styrene) is a widely used engineering thermoplastic that combines the best properties of **polycarbonate (PC) and ABS plastic. Read More